Faucet Replacement Cost: Kitchen, Bathroom, and Outdoor Spigots

Replacing a faucet seems straightforward, but costs can vary wildly depending on where it is and what complications arise. This guide breaks down the expected costs for bathroom, kitchen, and outdoor faucets based on national data. It also shows you who to call, how to protect your warranty, and what steps to take before hiring anyone.

We’ll cover typical price ranges, when DIY might work, and when you definitely need a licensed professional. This information will help you budget accurately and avoid common pitfalls that turn a simple swap into an expensive repair.

The total cost to replace a faucet depends on its location, style, and the condition of your plumbing. A typical bathroom faucet installation costs between $150 and $680. Kitchen faucet installations often range from $250 to $650 or more. Outdoor hose bib replacements can cost $150 to $500+, especially if freeze-proof parts or wall access is needed.

Who to call first: For urgent leaks, call a licensed p

• Who to call first: For urgent leaks, call a licensed plumber. For parts issues with a newly purchased faucet, contact the retailer.
• What it costs: Expect a wide range. The final price depends on the faucet itself, labor, and any unexpected repairs like valve replacements.
• Warranty proof: Always save your receipt and know the faucet's model number. Manufacturer warranties typically require this for claims.
• State/local checks: Before hiring, verify a contractor’s license with your state's licensing board (like CSLB in California).
• Warning signs: Be wary of contractors who won’t provide a license number, written scope, or itemized pricing.
• Avoid DIY when: Shutoff valves are old or corroded, access is very tight, or the job requires modifying your countertop.

The total faucet replacement cost is a combination of the new fixture and the labor to install it. Labor charges for a bathroom faucet typically range from $130 to $350. However, several factors can significantly change the final price.

Here are the typical cost ranges and what can drive them higher:

• Bathroom Faucet Installed: $150 – $680. The price changes based on the faucet's own cost, the condition of the shutoff valves, and whether the drain assembly also needs replacement.
• Kitchen Faucet Installed: $250 – $650+. Kitchen jobs often cost more due to features like pull-down sprayers, touchless activation, integrated filtration, and the number of holes in your countertop or sink.
• Outdoor Spigot/Hose Bib: $150 – $500+. Replacing a standard outdoor faucet is usually straightforward. The cost rises if you need a freeze-proof "sillcock" or if the plumber must access pipes inside a wall.
• Shutoff Valve Replacement Add-on: $75 – $250+. If the valves under your sink are old, corroded, or leaking, they must be replaced, adding to labor and parts.
• Countertop Drilling/Modification: $100 – $500+. If your new faucet doesn't match your sink's existing hole pattern, modifying stone or solid-surface countertops is risky and expensive.

Average Cost: A full bathroom faucet replacement, including the fixture and labor, typically falls between $230 and $680.

Many basic faucet swaps can be a DIY project if you're comfortable with simple tools and the plumbing is in good shape. This is usually safe only if the shutoff valves work properly, the connections are not corroded, and you have clear access under the sink.

You should call a licensed professional in these situations:

• The shutoff valves are old, corroded, or leaking.
• Access under the sink is very tight, requiring specialized tools.
• The job requires drilling or modifying your countertop, especially if it's stone.
• You discover a leak in the supply lines or drain pipe.
• The work is on an outdoor spigot that involves wall access or connecting to underground pipes.

Remember, a manufacturer's warranty typically covers defective parts and finish, not installation labor. If you install it yourself and something goes wrong, the parts may be covered, but any related damage likely won't be. A professional installer should provide their own labor warranty.

Your first contact depends on the situation.

• For an urgent leak: First, turn off the water supply to the fixture or your home's main valve. Then, call a licensed plumber or emergency plumbing company.
• For a planned replacement: You can hire a plumber or a qualified handyman (where local regulations allow). Use a plumber for any work involving valve replacement, pipe leaks, or wall access.
• If your new faucet arrived damaged or is missing parts: Contact the retailer (like Home Depot or Lowe's) with your order number and photos.
• If a faucet part fails after installation: Contact the manufacturer's warranty support (like Delta or Moen) with your model number and proof of purchase.
• For issues with installation booked through a store: Contact the retailer's installation service department.

Call a Pro If: You find corroded shutoff valves or need to modify your countertop. These issues quickly complicate a simple job.

Having the right contact information saves time. Here are key contacts from major brands and retailers mentioned in our source.

Faucet Manufacturers:

• Delta Faucet: 1-800-345-DELTA (3358). Have your model number, photos, receipt, and finish color ready.
• Moen: Use the official Moen support contact form. A common support line is 1-800-BUY-MOEN (289-6636). Register your product and upload proof of purchase when requested.
• Kohler: Use the official Kohler support contact page. Use the model number/photo lookup tool on their warranty page.
• American Standard: U.S. consumer phone/SMS: 855-815-0004. Confirm your product category, as bathing/shower products may route differently.

Related Appliance/Disposal Support:

• InSinkErator (garbage disposals): Text support: 262-233-2231. The serial number is on a tag near the bottom of the unit.
• Whirlpool/KitchenAid: Whirlpool: 1-866-698-2538; KitchenAid major appliances: 1-800-422-1230.

Major Retailers:

• Home Depot Customer Service: 1-800-HOME-DEPOT (466-3337). Use for product orders, installation complaints, receipts, and return disputes.
• Lowe’s Customer Service: 1-800-445-6937. Use for orders, returns, and damage claims.
• Lowe’s Installation Scheduling: 1-877-GO-LOWES (465-6937). Use only if the job was booked through Lowe’s installation services.

Emergency Plumbing Services:

• Roto-Rooter: 1-800-GET-ROTO (438-7686). For urgent drain, sewer, leak, and water cleanup. Always confirm a local quote.
• Mr. Rooter Plumbing: Corporate customer service: (855) 982-2028. Local franchise numbers vary.

Following the correct steps ensures your claim is processed smoothly.

1. Locate your documents. Find the faucet’s model number and your proof of purchase (receipt or invoice).
2. Contact the correct party.
3. - For defective cartridges, finish, or parts after installation, contact the manufacturer's support first.
4. - If the faucet arrived damaged or with missing parts, contact the retailer with your order number and photos.
5. - If the installer caused a leak or damage, request a correction under their labor warranty and document the damage.
6. Provide required information. Be ready to supply model numbers, photos of the issue, and proof of purchase as requested.
7. Follow up in writing. For installer-related issues, get any warranty details and the claim process in writing.

Warranty Documents Needed: Always keep your model number and dated sales receipt. You will need them for any manufacturer claim.

State-Specific or Local Checks

Before hiring any contractor, take a few minutes to verify their credentials with your state or local agency. This is a critical step for your protection.

• California: Verify the contractor at the Contractors State License Board (CSLB). For plumbing, ask for an active C-36 plumbing contractor license, workers' compensation status, bond information, and complaint history.
• Texas: Verify plumbers with the Texas State Board of Plumbing Examiners. For excavation or sewer work, also confirm city permits and 811 locate requirements.
• Florida: Verify contractor or plumbing licenses through DBPR/MyFloridaLicense. Local permit rules vary by county and city.
• New York / NYC: In NYC, check for Department of Buildings licensed plumbers. Elsewhere in New York, check state/local license directories and your local building department.
• Any State: Call 811 before any excavation. For work on public water or sewer laterals, contact your local water utility or public works department before authorizing digging.

Get clear answers to these questions before you approve any work or pay a deposit.

• Is the estimate itemized for parts, labor, permits, disposal, and any trip or emergency fees?
• Is the contractor licensed for this exact trade in my state or city? Can I verify the license number online?
• If a permit is needed, will the contractor pull the permit, schedule the inspection, and provide proof of final approval?
• Does the quote include cleanup, haul-away, and any necessary repairs to drywall, flooring, landscaping, or pavement?
• What is excluded from the quote? What conditions (like corroded pipes) will trigger a change order and extra cost?

Watch for these warning signs when getting quotes or hiring someone.

• A contractor refuses to provide their license number, a written scope of work, proof of insurance, or itemized pricing.
• The quote is unusually low but excludes common charges like excavation, disposal, permits, or restoration.
• The salesperson pressures you to sign immediately or claims permits are "never needed" without checking your local jurisdiction.
• Warranty details are verbal only. Always ask for manufacturer warranty, labor warranty, and the claim process in writing.
• For any job involving digging, starting before an 811 locate or city utility clearance is complete creates serious safety and financial risk.

Do Not Ignore: Anyone who wants to dig without calling 811 first is creating a serious risk of hitting gas, water, or electrical lines.

Practical Step-by-Step Guidance

Follow this actionable plan for a smooth faucet replacement process.

Before You Buy a New Faucet: 1. Check compatibility: Count the holes in your sink. Measure the distance between them (the "spread") for bathroom faucets. 2. Test shutoff valves: Turn the valves under the sink off and on. If they are stiff, leak, or don't fully stop water flow, they will likely need replacement. 3. Choose the right type: Decide on features (like pull-down spray for kitchen) and ensure the new faucet fits your sink's hole configuration. Buy a deck plate if needed to cover extra holes.

Before Hiring a Professional: 1. Get multiple estimates: Obtain at least 2-3 written, itemized quotes. 2. Verify licenses: Check the contractor’s license with your state board (see State-Specific Checks above). 3. Ask about permits: Inquire if the job requires a permit and who will handle it. 4. Confirm warranty: Understand both the manufacturer's product warranty and the installer's labor warranty. 5. Call 811: If the job involves any digging (like for an outdoor spigot), call 811 at least a few business days before work starts.

For Warranty or Refund Claims: 1. Gather evidence: Take clear photos of the defective part, damage, or leak. Locate your receipt and model number. 2. Contact the correct party: Use the contact guidelines in the "Who to Contact" section. 3. Keep records: Document all communication, including who you spoke with, dates, and case/reference numbers.

Frequently Asked Questions

Can I replace a faucet myself? Many basic faucets can be a DIY project if the shutoff valves work and you have good access under the sink. However, corroded valves, tight access, and old plumbing are strong reasons to hire a professional.

Why does a simple faucet quote get expensive? The initial quote is often for a straightforward swap. The price can increase if the plumber discovers old or corroded shutoff valves that need replacing, hard-to-reach nuts that take extra time, the need for countertop drilling, drain replacement, or unexpected leaks.

Do faucet warranties cover labor? Typically, manufacturer warranties focus on parts and finish coverage. The installer's labor warranty is separate. Always ask your installer about the length and terms of their workmanship guarantee.

Who should install my faucet? A plumber or qualified handyman (where allowed) can handle most installations. You should use a licensed plumber for any work involving valve replacement, pipe leaks, or access inside walls.

What should I do first if I have a leak? Immediately shut off the water to the fixture using the local shutoff valves or your home's main water valve. Protect surrounding flooring with towels. Then, call a licensed plumber for repair.

How do I check if a plumber is licensed? Ask for their state-issued license number. Then, visit your state's licensing board website (like CSLB for California) and verify the license status, complaint history, and insurance online.

This article was compiled using data from cost guide services and official company contacts. Prices are national averages and can vary significantly by location, market conditions, and job complexity.

• HomeGuide Faucet Installation Cost: homeguide.com
• Angi Leaky Faucet Repair Cost: angi.com
• Delta Faucet Support: deltafaucet.com
• Kohler Support: kohler.com
• American Standard Contact: americanstandard-us.com
• Home Depot Customer Service: corporate.homedepot.com
• Lowe’s Customer Service: corporate.lowes.com

Please verify all information locally before acting. Contact numbers, warranty terms, permit requirements, and licensing rules can change. Always confirm pricing with local professionals, check the latest details on official brand websites, and consult your local building department for permit guidance.

This guide provides general cost information and steps for planning a faucet replacement. It is not a substitute for professional advice. For your specific situation, always verify details with licensed plumbing professionals, official brand support channels, your retailer, and relevant state or local licensing boards and building departments. Taking these verification steps helps ensure a successful project and protects your investment in your home.

About the TDL Expert Panel

TDL Expert Panel · TheDigitalLife Editorial Team

TDL Expert Panel is the editorial team behind TheDigitalLife. The team researches, reviews, and creates practical guides to help everyday readers make better decisions about home repair costs, refunds, AI tools, digital safety, productivity, and useful online resources. Each guide is written to be clear, useful, and easy to understand.

Contact TheDigitalLife